Buy Orange Monte Carlo

Check FTM Mode

Page 3 of 6 - How to unlock the Orange Monte Carlo for free


Introduction » Install USB drivers » Check FTM » Backup qcn » Restore qcn » Comments


You need to boot your phone into FTM mode. Follow the instructions below.

  1. From your phone, go to Settings -> Applications -> Development.
  2. Make sure USB debugging is unticked.
  3. Turn off your phone.
  4. Remove the battery.
  5. Wait 5 seconds.
  6. Reinsert the battery.
  7. Disconnect your phone from your computer.
  8. Hold the Volume down button and the Power on button together, for 10 seconds.
  9. Click the result from the options below.

I see "FTM" on my screen.

  1. Remove the battery.
  2. Wait 5 seconds.
  3. Reinsert the battery.
  4. Turn your phone on.
  5. Open Settings from the app list on your phone
  6. Go to Applications -> Development.
  7. Tick USB debugging.
  8. Turn off your phone and wait 5 seconds.
  9. Hold the Volume down button and the Power on button together, for 10 seconds.
  10. Keep your phone in FTM mode and continue to the next page.

I see ClockworkMod Recovery, and I can use the voume buttons to navigate.

  1. Using the Volume buttons, highlight reboot system now.
  2. Press the Home button to select reboot system now.
  3. Wait until your phone has booted as normal.
  4. Download update.zip to your computer, and wait till it completes.
  5. Connect your phone to your computer.
  6. A new storage device / Removable Disk should pop up on your computer.
  7. Copy update.zip (the file you just downloaded) and paste it to the storage device / Removable Disk. Do not unzip the file.
  8. Once the file has copied, disconnect your phone from your computer.
  9. From your phone, go to Settings -> Applications -> Development.
  10. Tick USB debugging.
  11. Turn off your phone.
  12. Remove the battery from your phone.
  13. Wait 5 seconds
  14. Reinsert the battery.
  15. Hold the Volume down and Power on button together.
  16. Use the Volume buttons to highlight install zip from sdcard.
  17. Press the Home button to select install zip from sdcard.
  18. Highlight and select choose zip from sdcard.
  19. Highlight and select update.zip
  20. Highlight and select Yes - Install update.zip
  21. Wait until it completes (should take no more than 20 seconds)
  22. Remove the battery from your phone.
  23. Wait 5 seconds
  24. Reinsert the battery.
  25. Hold the Volume down and Power on button together, until you see FTM on your phone's screen.
  26. Keep you phone in FTM mode, and continue to the next page.

I see ClockworkMod Recovery, but I CANNOT use the voume buttons to navigate (it's FROZEN).

  1. Remove the battery from your phone.
  2. Wait 5 seconds
  3. Reinsert the battery.
  4. Turn on your phone.
  5. Wait until your phone has booted as normal.
  6. Download update.zip to your computer, and wait till it completes.
  7. Connect your phone to your computer.
  8. A new storage device / Removable Disk should pop up on your computer.
  9. Copy update.zip (the file you just downloaded) and paste it to the storage device / Removable Disk. Do not unzip the file.
  10. Once the file has copied, disconnect your phone from your computer.
  11. From your phone, go to Settings -> Applications -> Development.
  12. Tick USB debugging.
  13. Turn off your phone.
  14. Remove the battery from your phone.
  15. Wait 5 seconds
  16. Reinsert the battery.
  17. Hold the Voume up, Home and Power on buttons together (it's awkward, I know!) until you see ClockworkMod Recovery.
  18. Use the Volume buttons to highlight install zip from sdcard.
  19. Press the Home button to select install zip from sdcard.
  20. Highlight and select choose zip from sdcard.
  21. Highlight and select update.zip
  22. Highlight and select Yes - Install update.zip
  23. Wait until it completes (should take no more than 20 seconds)
  24. Remove the battery from your phone.
  25. Wait 5 seconds
  26. Reinsert the battery.
  27. Hold the Volume down and Power on button together, until you see FTM on your phone's screen.
  28. Keep you phone in FTM mode, and continue to the next page.

My phone has booted as normal.

  1. Turn off your phone and remove the battery.
  2. Wait 5 seconds.
  3. Reinsert the battery.
  4. Make sure your phone is disconnected from your computer.
  5. Hold the Volume down and Power on button at the same time, for 10 seconds.
  6. Click the appropriate result from the options above.